| Category |
Albums |
Files |
| Hardwood Floor ColorsChoices available for hardwood floor colors. Including oak hardwood floors colors and pine hardwood floor colors. |
|
1 |
14 |
|
| Hardwood Floor Installation TipsHow to install hardwood floors. This includes nail down hardwood floor installation tips, glue down hardwood installation tips, and snap down hardwood floor installation tips |
|
3 |
24 |
|
| 38 files in 13 albums and 2 categories with 0 comments viewed 6398 times |
| Random files |
laying first rowsHere is an example of how to lay the first few rows with felt on top of a plywood subfloor.
|
|
Ebony stain
|
|
felt over wooden subfloorIf you are laying floor over a subfloor you need to install felt or plastic first to block the moisture. You also want to make sure your floor is either running perpendicular or at a 45 degree to the planks you are laying.
|
|
Starting a glue down floorWhen starting a glue down floor you will want to space it 1/2" to 3/4" from the wall. This allows the wood to contract and expand. One trick to laying glue down on concrete is to carefully snap a caulk line the thickness of the plank plus a gap from the wall. Then set the first few rows and allow them to dry. That way you can press the new rows without them moving.
|
|
nutmeg stain
|
|
rosewood stain
|
|
| Last additions |
Laying the snap down flooringLaying snap down is simply a matter of cutting the wood so the seams don't line up. Many snap down products are manufactured with chip wood and do not handle moister at all. So think about where you are laying these floors. Some product requires that all the ends are snapped togeither then the entire row is snapped into the previous row. Aug 11, 2007
|
|
Underlayment for snap down flooringSnap down is a simple installation process. You simply lay down the underlayment which is usually a sound deadener and padding. Aug 11, 2007
|
|
Starting a glue down floorWhen starting a glue down floor you will want to space it 1/2" to 3/4" from the wall. This allows the wood to contract and expand. One trick to laying glue down on concrete is to carefully snap a caulk line the thickness of the plank plus a gap from the wall. Then set the first few rows and allow them to dry. That way you can press the new rows without them moving. Aug 11, 2007
|
|
Glue down is usually engineered plank and can be installed above and below gradeAug 11, 2007
|
|
Typical Tongue and Grove section of woodAug 11, 2007
|
|
Troweling the glue to prepare for the floor installationYou will want to trowel a few rows at a time and no more. Most of the glue available will give you 30 minutes of work time. THis usually will allow you to do a couple of feet of flooring.Aug 11, 2007
|
|
